Canon SX50 Realis_E.pdf - Page 57

Selecting an Input Signal Type (3) Selecting a Screen Mode (1) When images from AV equipment is not projected correctly, you can select an input signal type manually. When the projected image size is larger/ smaller than the screen size. Display settings Input signal select Display settings Screen settings SETTING UP FUNCTIONS USING MENUS Auto 1080i 1035i 720p 575p 480p 575i 480i The video format is automatically set according to the input signal. If images are not projected correctly in the Auto mode, select one of input signal types shown on the left. Confirm the input signal type according to the User's Manual that came with the AV equipment connected. Full screen Normal Wide Screen True size An image from the computer is projected fully on the screen. An image is projected in the maximum size with the aspect ratio unchanged. An image is projected at 16:9 aspect ratio with its width matching to the width of the screen. An image is projected in its original size (no enlargement/ reduction). • Set the display resolution of the computer to 1400 x 1050 dots or lower. • When Full screen is selected, circles may become out of round depending on the display resolution of the computer. • The upper, lower, left, and/or right portions of a projected image may be missing depending on the selected display mode. 57