Canon SX50 Realis_E.pdf - Page 24
Connecting to Audio Terminals, Projecting the Image from the Notebook Computer
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Connecting to Audio Terminals Before connecting cables, turn off both the projector and computer. Connect audio cables as required. Computer To AUDIO OUT Connect with an audio cable (with stereo mini jacks). PROJECTING AN IMAGE FROM THE COMPUTER • Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. • The built-in speaker is monaural. • The speaker plays the sound from the equipment which the audio cable is connected to. Projecting the Image from the Notebook Computer No image is projected if the external monitor output is turned off on the personal computer side. To turn on the external monitor output, press the [LCD] or [VGA] function key while pressing the Fn key on the keyboard of the personal computer. The following table shows relationships between personal computer manufacturers and key combinations. FUJITSU SONY Panasonic SHARP TOSHIBA NEC IBM All series All series All series All series All series All series All series [Fn] + [F10] [Fn] + [F7] [Fn] + [F3] [Fn] + [F5] [Fn] + [F5] [Fn] + [F3] [Fn] + [F3] HITACHI COMPAQ DELL GATEWAY SOTEC akia All series PRESARIO ARMADA All series All series All series All series [Fn] + [F7] [Fn] + [F7] [Fn] + [F4] [Fn] + [F8] [Fn] + [F3] [Fn] + [F3] [Fn] + [F2] For the key combination of the computer series not listed in the above table, refer to the User's Manual that came with the computer. 24