Canon SX50 Realis_E.pdf - Page 22
Adjusting the Projection Angle
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
INSTALLING THE PROJECTOR Adjusting the Projection Angle The projection angle can be adjusted with the adjustable foot. Before making this adjustment, connect the computer and AV equipment and project an image on the screen. 1 Lift the front of the projector and push the adjusting foot lock. The adjustable foot extends with the spring force. 2 Adjust the projection angle while pushing the adjustable foot lock, and then release the lock. With the adjustable foot, the projection angle can be adjusted up to 10 degrees. Adjust the longitudinal tilt of the projector to +/-20 degrees or less. If the tilt is more than 20 degrees above and below, a lamp problem can result. If Keystone Distortion is Large Extending the adjustable foot too far causes keystone distortion (the projected picture is trapezoidal). If the distortion is large, adjust the height of the pedestal of the projector. The keystone distortion can be corrected using the KEYSTONE button. (P31) Keystone distortion of image Adjusting foot Pedestal 22