Canon SX50 Realis_E.pdf - Page 80
Symptoms and Solutions
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Symptoms and Solutions No power Cause Countermeasure The power cord is not connected prop- Check whether the power cord is connected properly. erly. (P26) The power cord has just been con- After connecting the power plug, you cannot turn on the nected. projector before the [POWER] lights red. (P27) You attempted to turn on the projector The projector cannot be turned on for about 90 seconds immediately after turning it off. after it is turned off. Wait for at least 90 seconds and press the [POWER] but- ton again. (P35) No image Cause Countermeasure Any connection cable is connected Check whether the projector is properly connected to the improperly. computer and AV equipment. (P23, 42) 20 seconds have not passed since the When the projector is turned on, the Opening window is projector was turned on. displayed for about 20 seconds. To project an image immediately, press the [OK] button on the remote control or top control. (P27) No image is sent from the AV equip- Check that an image is played back on the connected dig- ment. ital camera, video camcorder, DVD, etc. (P47) Connection to the video terminal or Check that connection to the video terminal is correct. selection of a signal type is incorrect. Also check that selection of a signal type is correct. (P28, 47) The [NO SHOW] function is selected. Press the [NO SHOW] button on the remote control. (P37) No image is sent due to the problem Turn on the projector and computer in this order again. occurred on the computer side. TROUBLESHOOTING 80