Cisco 7931G Administration Guide - Page 112
Security Configuration Menu
UPC - 882658128578
View all Cisco 7931G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-10 Ethernet Configuration Menu Options Option Description To Change Forwarding Delay Indicates whether the internal switch begins forwarding packets between the PC port and switched port on the phone when the phone becomes active. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. • When forwarding delay is set to disabled, the internal switch begins forwarding packets immediately. • When forwarding delay is set to enabled, the internal switch waits 8 seconds before forwarding packets between the PC port and the switch port. Default is disabled. Span to PC Port Indicates whether the phone forwards From Cisco Unified Communications packets transmitted and received on the Manager Administration, choose Device network port to the access port. > Phone > Phone Configuration. Enable this option if an application that requires monitoring of the phone's traffic is being run on the access port. These applications include monitoring and recording applications (common in call center environments) and network packet capture tools that are used for diagnostic purposes. Security Configuration Menu The Security Configuration menu that you access from the Device Configuration menu displays settings that relate to security for phone. Table 4-11 describes the options on the Security Configuration menu. 4-28 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01