Cisco 7931G Administration Guide - Page 142

Telephony Features Available for the Phone Chapter 5 Configuring Features, Templates, Services, and Users Table 5-1 Feature Ring setting Silent Monitoring Services Telephony Features for the Cisco Unified IP Phone (continued) Description Configuration Reference Identifies ring type used for a line when a phone has another active call. For more information refer to: • Cisco Unified Communications Manager Administration Guide, "Configuring Directory Numbers" chapter. • Cisco Unified Communications Manager Features and Services Guide, "Custom Phone Rings" chapter. • "Creating Custom Phone Rings" section on page 6-2. Allows a supervisor to silently monitor an active call. The supervisor cannot be heard by either party on the call. The user might hear an intermittent tone (beep tone) during a call when it is being monitored. For more information, refer to Cisco Unified Communications Manager Features and Services Guide, "Monitoring and Recording" chapter. Note The intercom feature is disabled when a call is being monitored or recorded. Allows you to use the Cisco Unified IP Phone Services Configuration menu in Cisco Unified Communications Manager Administration to define and maintain the list of phone services to which users can subscribe. For more information refer to: • Cisco Unified Communications Manager Administration Guide, "Cisco Unified IP Phone Configuration" chapter. • Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone Services" chapter. 5-16 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01