Cisco 7931G Administration Guide - Page 123

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Security Configuration Menu Table 4-16 Trust List Menu Settings (continued) Option CallManager / TFPT Server SRST Router Description To Change IP address of a Cisco Unified Communications Manager and TFTP server used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. IP address of the trusted SRST router that is available to the phone, if such a device has been configured in Cisco Unified Communications Manager Administration. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. 802.1X Authentication and Status The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X authentication and monitor its progress. These options are described in Table 4-17 and Table 4-18. You can access these menus from the Settings menu > Security Configuration menu by choosing 802.1X Authentication or 802.1X Authentication Status. For instructions about how to access the Security Configuration menu and its submenus, see the "Displaying a Configuration Menu" section on page 4-3. Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01 4-39