Cisco 7931G Administration Guide - Page 63

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Adding Phones to the Cisco Unified Communications Manager Database Adding Phones to the Cisco Unified Communications Manager Database Before installing the Cisco Unified IP Phone, you must choose a method for adding phones to the Cisco Unified Communications Manager database. These sections describe the methods: • Adding Phones with Auto-Registration, page 2-12 • Adding Phones with Auto-Registration and TAPS, page 2-13 • Adding Phones with Cisco Unified Communications Manager Administration, page 2-14 • Adding Phones with BAT, page 2-14 Table 2-4 provides an overview of these methods for adding phones to the Cisco Unified Communications Manager database. Table 2-4 Methods for Adding Phones to the Cisco Unified Communications Manager Database Method Auto-registration Auto-registration with TAPS Using Cisco Unified Communications Manager Administration Using BAT Requires MAC Address? Notes No Results in automatic assignment of directory numbers. Not available when security or encryption is enabled. No Requires auto-registration and the Bulk Administration Tool (BAT); updates the Cisco Unified Communications Manager database with the MAC address and DNs for the device when user calls TAPS from the phone. Yes Requires phones to be added individually. Yes Can add groups of same model of phone. Can schedule when phones are added to the Cisco Unified Communications Manager database. Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01 2-11