Cisco 7931G Administration Guide - Page 202
Rcvr Report Time
UPC - 882658128578
View all Cisco 7931G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Streaming Statistics Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Table 8-5 Streaming Statistics Area Items (continued) Item Sender Packets Sender Octets Sender Codec Sender Reports Sent1 Sender Report Time Sent1 Rcvr Lost Packets Avg Jitter Rcvr Codec Rcvr Reports Sent1 Rcvr Report Time Sent1 Rcvr Packets Rcvr Octets Description Total number of RTP data packets transmitted by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Total number of payload octets transmitted in RTP data packets by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Type of audio encoding used for the transmitted stream. Number of times the RTCP Sender Reports have been sent. Internal time stamp indicating when a RTCP Sender Report was sent. Total number of RTP data packets that have been lost since starting receiving data on this connection. Defined as the number of expected packets less the number of packets actually received, where the number of received packets includes any that are late or duplicate. The value displays as 0 if the connection was set to send-only mode. Estimate of mean deviation of the RTP data packet inter-arrival time, measured in milliseconds. The value displays as 0 if the connection was set to send-only mode. Type of audio encoding used for the received stream. Number of times the RTCP Receiver Reports have been sent. Internal time stamp indicating when a RTCP Receiver Report was sent. Total number of RTP data packets received by the phone since starting receiving data on this connection. Includes packets received from different sources if this is a multicast call. The value displays as 0 if the connection was set to send-only mode. Total number of payload octets received in RTP data packets by the device since starting reception on the connection. Includes packets received from different sources if this is a multicast call. The value displays as 0 if the connection was set to send-only mode. 8-16 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01