Cisco 7931G Administration Guide - Page 82

Configuring Security on the Cisco Unified IP Phone Chapter 3 Setting Up the Cisco Unified IP Phone • The CTL file should have a CAPF certificate. • The CAPF certificate must exist in the /usr/local/cm/.security/certs folder in every server in the cluster. • The CAPF is running and configured. Refer to Cisco Unified Communications Manager Security Guide for more information. Depending on how you have configured the CAPF, this procedure installs an LSC, updates an existing LSC, or removes an existing LSC. To configure an LSC on the phone, follow these steps: Procedure Step 1 Step 2 Obtain the CAPF authentication code that was set when the CAPF was configured. From the phone, press the Applications Menu button, then choose Settings > Security Configuration. Note You can control access to the Settings Menu by using the Settings Access field in the Cisco Unified Communications Manager Administration Phone Configuration Settings page. For more information, see Cisco Unified Communications Manager Administration Guide. Step 3 Step 4 Step 5 Press **# to unlock settings on the Security Configuration menu. Scroll to LSC and press the Update softkey. The phone prompts for an authentication string. Enter the authentication code and press the Submit softkey. The phone begins to install, update, or remove the LSC, depending on how the CAPF was configured. During the procedure, a series of messages appears in the LSC option field in the Security Configuration menu so that you can monitor progress. When the procedure completes successfully, the phone will display Installed or Not Installed. 3-14 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01