Cisco 7931G Administration Guide - Page 200

Device Logs Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Table 8-4 Access Area and Network Area Items (continued) Item Rx tokenDrop Tx excessDefer Tx lateCollision Tx totalGoodPkt Tx Collisions Tx excessLength Tx broadcast Tx multicast Neighbor Device ID Neighbor IP Address Neighbor Port Description Total number of packets dropped due to lack of resources (for example, FIFO overflow) Total number of packets delayed from transmitting due to medium being busy Number of times that collisions occurred later than 512 bit times after the start of packet transmission Total number of good packets (multicast, broadcast, and unicast) received by the phone Total number of collisions that occurred while a packet was being transmitted Total number of packets not transmitted because the packet experienced 16 transmission attempts Total number of broadcast packets transmitted by the phone Total number of multicast packets transmitted by the phone Identifier of a device connected to this port IP address of the neighbor device Neighbor device port to which the phone is connected Device Logs The Device Logs area on a phone's web page provides information you can use to help monitor and troubleshoot the phone. • Console Logs-Includes hyperlinks to individual log files. The console log files include debug and error messages received on the phone. • Core Dumps-Includes hyperlinks to individual dump files. 8-14 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01