Cisco 7931G Administration Guide - Page 80

Verifying the Phone Startup Process Chapter 3 Setting Up the Cisco Unified IP Phone Verifying the Phone Startup Process After the Cisco Unified IP Phone has power connected to it, the phone begins its startup process by cycling through these steps. 1. These buttons flash on and off in sequence: - Mute. - Speaker. - Line 1 (amber) 2. The phone screen displays the Cisco Systems, Inc., logo screen. 3. These messages appear as the phone starts: - Verifying load (if the phone load does not match the load on the TFTP server). If this message appears, the phone start up again and repeats step 1 and 2 above. The phone also displays the download progress and names of files it downloads and upgrades. - Configuring IP. - Updating CTL. - Updating Locale. - Configuring CM List. - Registering. 4. The main phone screen displays: - Current date and time - Primary directory number - Additional directory numbers and speed dial numbers, if configured - Softkeys If the phone successfully passes through these stages, it has started up properly. If the phone does not start up properly, see the "Resolving Startup Problems" section on page 9-2. 3-12 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01