Cisco 7931G Administration Guide - Page 52

Overview of Configuring and Installing Cisco Unified IP Phones Chapter 1 An Overview of the Cisco Unified IP Phone Table 1-7 Checklist for Installing the Cisco Unified IP Phone 7931G (continued) Task Purpose For More Information 4. Configure the following network settings on the phone. To enable DHCP: • Set DHCP Enabled to Yes • To use an alternate TFTP server, set Alternate TFTP Server to Yes and enter IP address for TFTP Server 1 To disable DHCP: Using DHCP-The IP address is automatically assigned and the Cisco Unified IP Phone is directed to a TFTP Server. Note Consult with the network administrator if you need to assign an alternative TFTP server instead of using the TFTP server assigned by DHCP. See the "Configuring Startup Network Settings" section on page 3-13. See the "Network Configuration Menu" section on page 4-7. • Set DHCP Enabled to No • Enter static IP address for phone • Enter subnet mask • Enter default router IP addresses Without DHCP-You must configure the IP address, TFTP server, subnet mask, domain name, and default router locally on the phone. • Enter domain name where phone resides • Set Alternate TFTP Server to Yes and enter IP address for TFTP Server 1 5. Set up security on the phone. Provides protection against data See the "Configuring Security on tampering threats and identity the Cisco Unified IP Phone" theft of phones. section on page 3-13. 6. Make calls with the Cisco Unified IP Phone. Verifies that the phone and features work correctly. Refer to Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0. 7. Provide information to end users about how to use their phones and how to configure their phone options. Ensures that users have adequate See Appendix A, "Providing information to successfully use Information to Users Via a their Cisco Unified IP Phones. Website." 1-34 Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 OL-12457-01