Cisco 7931G Administration Guide - Page 172
Settings > Security Configuration >, 1X Authentication, Cisco Unified Communications
UPC - 882658128578
View all Cisco 7931G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Status Menu Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Table 7-2 Status Messages on the Cisco Unified IP Phone 7931G (continued) Message Checksum Error CTL Installed CTL update failed DHCP timeout Disabled Description Possible Explanation and Action Downloaded software file is corrupted. Obtain a new copy of the phone firmware and place it in the TFTPPath directory. You should only copy files into this directory when the TFTP server software is shut down, otherwise the files may be corrupted. A certificate trust list (CTL) file is installed in the phone. None. This message is informational only. For more information about the CTL file, refer to Cisco Unified Communications Manager Security Guide. The phone could not update its Problem with the CTL file on the TFTP certificate trust list (CTL) file. server. For more information, refer to Cisco Unified Communications Manager Security Guide. DHCP server did not respond. • Network is busy-The errors should resolve themselves when the network load reduces. • No network connectivity between the DHCP server and the phone-Verify the network connections. • DHCP server is down-Check configuration of DHCP server. • Errors persist-Consider assigning a static IP address. See the "Network Configuration Menu" section on page 4-7 for details on assigning a static IP address. 802.1X Authentication is disabled on the phone. You can enable 802.1X authentication using the Settings > Security Configuration > 802.1X Authentication option on the phone. For more information, see the "802.1X Authentication and Status" section on page 4-39. Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0 7-6 OL-12457-01