Cisco SRW224G4P User Guide - Page 34
System Mode
UPC - 745883578535
View all Cisco SRW224G4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet System Mode The System Mode screen displays the following information. Jumbo Frames. Shows if jumbo frames are enabled. This switch provides more efficient throughput for large sequential data transfers by supporting jumbo frames up to 9216 bytes. Compared to standard Ethernet frames that run only up to 1.5 KB, using jumbo frames significantly reduces the per-packet overhead required to process protocol encapsulation fields. To use jumbo frames, both the source and destination end nodes (such as a computer or server) must support this feature. Also, when the connection is operating at full duplex, all switches in the network between the two end nodes must be able to accept the extended frame size. And for half-duplex connections, all devices in the collision domain would need to support jumbo frames. Enabling jumbo frames will limit the maximum threshold for broadcast storm control to 64 packets per second. The current setting for jumbo frames can be displayed with the show system command. Use the drop-down menu to Enable or Disable the transmitting and receiving of Jumbo Frames for this switch. Figure 5-5: Sys. Info - System Mode 26 Chapter 5: Configuring the Switch through the Web Utility System Information