Cisco SRW224G4P User Guide - Page 87
IP Multicast Reg Table, IGMP Member Conf
![]() |
UPC - 745883578535
View all Cisco SRW224G4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet IP Multicast Reg Table You can display the port members associated with a specified VLAN and multicast IP address. Select a VLAN ID and the IP address for a multicast service from the drop-down menus. The switch will display all the interfaces that are propagating this multicast service. Figure 5-67: IGMP - IP Multicast Reg Table IGMP Member Conf Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages. For certain applications that require tighter control, you may need to statically configure a multicast service on the switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the multicast service to that VLAN group. Specify the interface attached to a multicast service (via an IGMP-enabled switch or multicast router), indicate the VLAN that will propagate the multicast service, specify the multicast IP address, and click Add. Figure 5-68: IGMP - IGMP Member Conf 79 Chapter 5: Configuring the Switch through the Web Utility IGMP
![](/manual_guide/products/cisco-srw224p-user-guide-5f35032/87.png)