Cisco SRW224G4P User Guide - Page 76
Power Config
UPC - 745883578535
View all Cisco SRW224G4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet PoE This switch can provide DC power to a wide range of connected devices, eliminating the need for an additional power source and cutting down on the amount of cables attached to each device. Once configured to supply power, an automatic detection process is initialized by the switch that is authenticated by a PoE signature from the connected device. Detection and authentication prevent damage to non-802.3af compliant devices. The PoE tab includes links to the following screens. • Power Config • Power Port Config • Power Port Status • Power Status Power Config A maximum PoE power budget for the switch (power available to all switch ports) can be defined so that power can be centrally managed, preventing overload conditions at the power source. If the power demand from devices connected to the switch exceeds the power budget setting, the switch uses port power priority settings to limit the supplied power. Specify the desired power budget for the switch. Click Submit to save the changes. Figure 5-55: PoE - Power Config 68 Chapter 5: Configuring the Switch through the Web Utility PoE