Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 127
SW1 – System Identification Switch Settings, Table 4-4
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Connectors, Switches, and LED Indicators 4-5 SW1 - System Identification Switch Settings The processor configuration switchbank (SW1) is an eight-position switch that is used for processor configuration. Figure 4-3 shows the position of the SW1 switchbank on the system board. Positions are reserved. CAUTION: Do not adjust the settings of the system identification switch. SW2 - System Configuration Switch Settings The system configuration switchbank (SW2) is a six-position switch that is used for system configuration. Figure 4-3 shows the position of SW2 on the system board and Table 4-4 defines the function and shows the default switch settings for SW2. Table 4-4 System Configuration Switch Settings (SW2) Switch Position Function 1 Embedded video disable 2 Configuration lock 3 Rack mount 4 Diskette drive override 5 Password disable 6 Maintenance Note: On activates the function. Tower Default Off Off Off Off Off Off Rack Default Off Off On Off Off Off