Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 35
HotPlug SCSI Hard Drive
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Removal and Replacement Procedures 2-19 Hot-Plug SCSI Hard Drive To remove a hot-plug SCSI hard drive: 1. Open the front bezel (tower model only). See "Front Bezel" earlier in this chapter. 2. Press the release button and swing the lever outward from the bottom. 3. Pull the hot-plug SCSI hard drive out of the bay . 2 1 3 Figure 2-15. Removing a hot-plug SCSI hard drive Reverse steps 1 through 3 to replace the hot-plug SCSI hard drive.
Removal and Replacement Procedures
2-19
Hot-Plug SCSI Hard Drive
To remove a hot-plug SCSI hard drive:
1.
Open the front bezel (tower model only). See
“
Front Bezel
”
earlier in this chapter.
2.
Press the release button
and swing the lever
outward from the bottom.
3.
Pull the hot-plug SCSI hard drive out of the bay
.
1
2
3
Figure 2-15.
Removing a hot-plug SCSI hard drive
Reverse steps 1 through 3 to replace the hot-plug SCSI hard drive.