Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 66
Run Diagnostics. Replace failed, Failure in Bay X
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3-12 Compaq ProLiant ML370 Maintenance and Service Guide Table 3-2 POST Error Messages continued Error Code Audible Beeps 1611 - I/O Fan 2S (Fan X) failure detected 1611 - CPU Fan 2S (Fan X) failure detected 1612 - Primary 2S power supply failure 1613 - Low System None Battery 1615 - Power Supply None Failure, Power Supply Unplugged, or Power Supply Fan Failure in Bay X 1617 - Fan controller 2S not responding 1617 - I/O Fan 2S controller not responding 1617 - CPU Fan 2S controller not responding 1620 - Locked SCSI None Bus Detected. Verify SCSI bus cabling. System halted. 1621 - Current SCSI None bus cable configuration is not recommended 1622 - Internal SCSI None Jumper Board Not Installed Probable Source of Problem I/O fan has failed Recommended Action Replace the failed fan. CPU fan has failed Replace the failed fan. Primary power supply has failed Real time clock system battery is running low on power A power supply has failed. Replace power supply as soon as possible. Run Diagnostics. Replace failed assembly as indicated. Replace or check specified power supply. Fan controller failure I/O fan controller failure CPU fan controller failure SCSI bus failure Check and replace failed controller assembly. Check and replace failed controller assembly. Check and replace failed controller assembly. Run Diagnostics. Replace failed assembly as indicated. Improper SCSI bus cabling Check documentation for proper SCSI bus cabling. The system has detected that the array enabler board is not installed. Install the array enabler board. continued