Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 143
Automatic Server Recovery, Base Memory Parity
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
4 Compaq ProLiant ML370 Maintenance and Service Guide transporting parts safely 2-2 workstation recommendations 2-2 environmental recovery 3-51 error 101 through 105 3-8 101 through 199 3-27 1101 through 1199 3-31 1151 through 1611 3-11 1201 through 1299 3-32 122-XX 3-27 123-XX 3-27 1612 through 1622 3-12 162 through 164 3-8 1702 through 1731 3-13 172 through 180 3-8 1740 through 1767 3-15 1768 through 1773 3-16 1774 through 1779 3-17 1780 through 1789 3-19 1790 through 1799 3-23 1797 through 1799 3-25 199-XX 3-27 200 through 299 3-28 201 through 221 3-9 208 3-9 301 through 304 3-10 301 through 399 3-29 401 through 499 3-29 40X 3-11 501 through 599 3-30 600 through 699 3-31 6000 through 6099 3-32 601 through 605 3-11 6500 through 6599 3-33 6600 through 6699 3-33 6700 through 6799 3-34 8600 through 8699 3-34 Abnormal Program Termination 3-60, 3-61 AC voltage problem 3-49 Accelerator battery below reference voltage 3-38 battery not fully charged 3-38 board in use 3-38 board not attached 3-38 board not detected 3-36 board permanently disabled 3-37 board temporarily disabled 3-37 cache 3-36 configuration mismatch 3-38 data loss in cache 3-37 ECC errors 3-37 error log 3-36 obsolete data 3-37 obsolete data written to drives 3-37 parity read 3-36 parity write 3-36 unrecognized status 3-37 valid data at reset 3-37 warranty alert 3-37 adapter/NVRAM ID mismatch 3-38 ASR-2 detected by ROM 3-60, 3-61 ASR-2 IML messages 3-60 ASR-2 Test Event 3-60, 3-61 automatic OS shutdown 3-49 Automatic Server Recovery Base Memory Parity Error 3-60 Extended Memory Parity Error 3-60 Memory Parity Error 3-60 Reset Limit Reached 3-60 battery below reference voltage 3-38 less than 75% at sufficient charge 3-41 not fully charged 3-38 Battery Failing 3-60 board not attached 3-38 Caution, Temperature Exceeded 3-60 configuration signature is zero 3-38 configuration signature mismatch 3-38 controller communication failure 3-38 configured 3-39 firmware needs upgrading 3-38 located in special video slot 3-38 POST error 3-39 restarted with signature of zero 3-39 Controller detected. NVRAM configuration not present 3-38