Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 47

Memory, Table 2-3, SDRAM DIMM Slot Locations

Get Compaq ML370 - ProLiant - 128 MB RAM PDF manuals and user guides
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Removal and Replacement Procedures 2-31 Memory Compaq ProLiant ML370 Servers ship standard with a 128-MB Synchronous DRAM (SDRAM) dual inline memory module (DIMM) installed in DIMM slot 1. Memory is expandable to 4 GB (when 1-GB DIMMs are available). 1 2 3 4 Figure 2-27. DIMM slots on the system board Table 2-3 SDRAM DIMM Slot Locations Item Description SDRAM DIMM slot 1 (populated with standard 128-MB DIMM) SDRAM DIMM slot 2 SDRAM DIMM slot 3 SDRAM DIMM slot 4 CAUTION: Use only Compaq DIMMs. DIMMs from other sources may adversely affect data integrity. Power-On Self-Test (POST) will warn of nonsupported DIMMs. IMPORTANT: The following guidelines MUST be followed when installing or replacing memory: Use 133-MHz, 64-, 128-, 256-, 512-MB or 1-GB registered SDRAM DIMMs, 3.3 volts, 72 bits wide, with Error Correction Code (ECC). Any combination of the above modules can be used. Install SDRAM DIMM modules one at a time in sequential order, starting with DIMM slot 1. Install DIMMs of the same speed. Do not install DIMM modules supporting different speeds. Install DIMMs only in one direction. Ensure that the notch on the module matches the tab on the DIMM slot and that the module is fully inserted and properly seated.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Removal and Replacement Procedures
2-31
Memory
Compaq ProLiant ML370 Servers ship standard with a 128-MB Synchronous DRAM
(SDRAM) dual inline memory module (DIMM) installed in DIMM slot 1. Memory is
expandable to 4 GB (when 1-GB DIMMs are available).
1
2
3
4
Figure 2-27.
DIMM slots on the system board
Table 2-3
SDRAM DIMM Slot Locations
Item
Description
SDRAM DIMM slot 1 (populated with standard 128-MB DIMM)
SDRAM DIMM slot 2
SDRAM DIMM slot 3
SDRAM DIMM slot 4
CAUTION:
Use only Compaq DIMMs. DIMMs from other sources may adversely affect data
integrity. Power-On Self-Test (POST) will warn of nonsupported DIMMs.
IMPORTANT:
The following guidelines
MUST
be followed when installing or replacing memory:
■
Use 133-MHz, 64-, 128-, 256-, 512-MB or 1-GB registered SDRAM DIMMs, 3.3 volts, 72 bits wide,
with Error Correction Code (ECC).
■
Any combination of the above modules can be used.
■
Install SDRAM DIMM modules one at a time in sequential order, starting with DIMM slot 1.
■
Install DIMMs of the same speed. Do not install DIMM modules supporting different speeds.
■
Install DIMMs only in one direction. Ensure that the notch on the module matches the tab on the
DIMM slot and that the module is fully inserted and properly seated.