Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 82
299, Memory Test Error Codes, Table 3-4
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
3-28 Compaq ProLiant ML370 Maintenance and Service Guide 200-299, Memory Test Error Codes The 200 series of diagnostic error codes identifies failures with the memory subsystem. Table 3-4 Memory Test Error Codes Error Code 200-xx 201-xx 202-xx 203-xx 204-xx 205-xx 206-xx 207-xx 208-xx 209-01 209-02 209-03 209-89 210-xx 211-01 211-02 211-03 211-04 211-05 211-89 214-01 214-89 215 Description Invalid memory configuration. Memory machine ID test failed. Memory system ROM checksum failed. Memory write/read test failed. Memory address test failed. Walking I/O test failed. Increment pattern test failed Invalid memory configuration-check DIMM installation. DIMMs installed have 8K refresh. Invalid memory speed detected check DIMM installation. Slow DIMMs may cause data loss. RAM long test failed. Error while saving test block. Error while restoring test block. ECC error during testing. Random pattern test failed. RAND test failed. Error while saving test block Error while restoring test block Insufficient memory to perform the test Failed inverted pattern compare, but RAM was correct ECC error during testing Data error during noise test ECC error during testing Non-functioning DC-DC converter for processor X Recommended Action Reinsert memory modules in correct location and retest. 1. Replace the system ROM and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. 1. Replace the memory module and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. Replace DIMMs. Replace DIMMs with timing greater than 60 ns. 1. Replace the memory module/board and retest. 2. Replace the system board and retest. 3. Replace the memory expansion board and retest. 1. Replace the memory module and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. 1. Replace the memory module/board and retest. 2. Replace the system board and retest. 1. Replace the memory module/board and retest. 2. Replace the system board and retest. Replace the DC-DC converter (Processor Power Module).