Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 88
6799, SCSI Tape Drive Test Error Codes
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3-34 Compaq ProLiant ML370 Maintenance and Service Guide 6700-6799, SCSI Tape Drive Test Error Codes The 6700 series of diagnostic error codes identifies failures with tape cartridges, tape drives, media changers, tape drive cabling, adapter boards, or the system board assembly. Table 3-14 SCSI Tape Drive Test Error Codes Error Code 6700-xx 6706-xx 6708-xx 6709-xx 6728-xx 7079 Description SCSI tape ID drive types test failed. SCSI disk SA/media test failed. SCSI controller test SCSI disk erase tape test failed. Media load/unload test failed. Battery test Recommended Action 1. Run the System Configuration Utility and verify the drive type. 2. Replace the SCSI tape drive signal and power cables and retest. 3. Replace the SCSI controller and retest. 4. Replace the SCSI tape drive and retest. 5. Replace the system board and retest. 8600-8699, Pointing Device Interface Test Error Codes The 8600 diagnostic error codes identifies failures with the pointing device (mouse, trackball, and so on) or the system board assembly. Table 3-15 Pointing Device Interface Test Error Codes Error Code 8601-xx Description Pointing Device Interface test failed. Recommended Action 1. Replace with a working pointing device and retest. 2. Replace the system board and retest.