Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 81

Diagnostics and Troubleshooting 3-27 100-199, Primary Processor Test Error Codes The 100 series of diagnostic error codes identifies failures with processor and system board functions generated by Compaq Server Diagnostics. Table 3-3 Primary Processor Test Error Codes Error Code 101-xx 103-xx 104-xx 105-xx 106-xx 107-xx 108-xx 109-xx 110-xx 111-xx 113-xx 114-xx 116-xx 122-xx 123-xx 199-xx Description CPU test failed DMA page registers test failed Interrupt controller master test failed Port 61 error Keyboard controller self-test failed CMOS RAM test failed CMOS interrupt test failed CMOS clock load data test failed Programmable timer load data test failed Refresh detect test failed Protected mode test failed Speaker test failed Cache test failed Multiprocessor Dispatch test failed Interprocessor Communication test failed Installed devices test failed Recommended Action Replace the processor board and retest. Replace the processor board and retest. 1. Replace the battery/clock module and retest. 2. Replace the system board and retest. Replace the processor board and retest. 1. Verify the speaker connection and retest. 2. Replace the speaker and retest. 3. Replace the system board and retest. Replace the system board and retest. 1. Check the system configuration and retest. 2. Replace the processor board and retest. 3. Replace the system board and retest. 1. Check the system configuration and retest. 2. Verify cable connections and retest. 3. Check switch and/or jumper settings and retest. 4. Run the Configuration Utility and retest. 5. Replace the processor board and retest. 6. Replace the system board and retest.