Compaq ML370 ProLiant ML370 Maintenance and Service Guide - Page 70
Run the System Configuration, Disk Port Address
UPC - 720591236915
View all Compaq ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3-16 Compaq ProLiant ML370 Maintenance and Service Guide Table 3-2 POST Error Messages continued Error Code Audible Beeps 1768 - Slot x Drive None Array-Resuming logical drive expansion process. 1769 - Slot x Drive None Array-Drive(s) disabled due to failure during expand. Select F1 to continue with logical drives disabled. Select F2 to accept data loss and to re-enable logical drives. 1770 - Slot x drive None array-critical drive firmware problem detected-please upgrade firmware on the following drive(s) using Options ROMPaq (available from www.compaq.com): SCSI port (y) SCSI ID (x) (RESUME = F1 or F2 KEY) 1771 - Primary Disk None Port Address Assignment Conflict 1772 - Secondary None Disk Port Address Assignment Conflict 1773 - Primary Fixed None Disk Port Assignment Conflict Probable Source of Problem SMART-2 Controller error SMART-2 Controller error Recommended Action No action required. Appears whenever a controller reset or power cycle occurs while array expansion is in progress. Data has been lost while expanding the array; therefore, the drives have been temporarily disabled. Press F2 to accept the data loss and re-enable the logical drives. Restore data from backup. Firmware update need indicated The indicated drives are running firmware that is known to cause intermittent problems. Please use the Compaq Options ROMPaq utility to upgrade firmware on all drives to the latest revision. Press F1 or F2 to resume. Internal and external hard drive controllers are both assigned to the primary address. Address assignment conflict: internal and external hard drive controllers are both assigned to the secondary address. Fixed disk drive error Run the System Configuration Utility and correct. Run the System Configuration Utility and correct. Run the System Configuration Utility and correct. continued