D-Link DGS-1520 User Manual - Page 117

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Single IP Settings This window is used to display and configure the SIM settings. The Switch is set as a Candidate (CaS) as the factory default configuration and Single IP Management is disabled. To view the following window, click Management > Virtual Stacking (SIM) > Single IP Settings, as shown below: Figure 4-92 Single IP Settings Window The fields that can be configured in SIM State Configure are described below: Parameter SIM State Description Select this option to enable or disable the SIM state on the Switch. Select Disabled to disable SIM on the Switch. Click the Apply button to accept the changes made. The fields that can be configured in SIM Role Configure are described below: Parameter Role State Group Name Description Select to change the SIM role of the Switch. Options to choose from are: • Candidate - A Candidate Switch (CaS) is not the member of a SIM group but is connected to a Commander Switch. • Commander - Select to make the Switch a Commander Switch (CS). The user may join other Switches to this Switch, over Ethernet, to be part of the SIM group. Choosing this option will also enable the Switch to be configured for SIM. By default, the Candidate option is used. Enter a group name. This is optional. This name is used to segment Switches into different SIM groups. Click the Apply button to accept the changes made. The fields that can be configured in SIM Settings are described below: Parameter Trap State Interval Hold Time Management VLAN Description Select to enable or disable the SIM trap state here. Enter the interval in seconds. The range is from 30 to 90. Enter the hold-time in seconds. The range is from 100 to 255. Enter the single IP management message VLAN ID. 107