D-Link DGS-1520 User Manual - Page 229

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Static ARP This window is used to display and configure the static ARP settings. To view the following window, click L3 Features > ARP > Static ARP, as shown below: Figure 6-2 Static ARP Window The fields that can be configured in the Static ARP Setting section are described below: Parameter IP Address Hardware Address Description Enter the IP address that will be associated with the MAC address here. Enter the MAC address that will be associated with the IP address here. Click the Apply button to accept the changes made. The fields that can be configured in the Static ARP Search section are described below: Parameter IP Address IP Network Mask Hardware Address Interface VLAN Description Select and enter the IP address of the static ARP entry here. Select and enter the subnet mask of the static ARP entry here. Select and enter the MAC address of the static ARP entry here. Select and enter the interface VLAN ID for the search here. Click the Find button to find and display the entries, based on the information entered, in the Static ARP Table. Click the Show All button to display all the static ARP entries in the Static ARP Table. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 219