D-Link DGS-1520 User Manual - Page 373

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Match CoS Description Select the IEEE 802.1Q Class of Service (CoS) value to be matched here. The range is from 0 to 7. When a packet is received, the packet will be given an internal CoS. This internal CoS is used to select the transmit queue based on the CoS to queue map. The CoS queue with a higher number will receive a higher priority. Select to None option to disable the matching of CoS values. Click the Back button to return to the previous window. Click the Apply button to accept the changes made. Network QoS Policy Map This window is used to display and configure the network QoS policy map settings. To view the following window, click QoS > QoS PFC > Network QoS Policy Map, as shown below: Figure 7-22 Network QoS Policy Map Window The fields that can be configured in Create/Delete Network QoS Policy Map are described below: Parameter Network QoS Policy Map name Description Enter the network QoS policy map name here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. The fields that can be configured in Traffic Policy are described below: Parameter Network QoS Policy Map Name Network QoS Class Map Name Description Enter the network QoS policy map name here that will be associated with the class map. This name can be up to 32 characters long. Enter the network QoS class map name here that will be associated with the policy map. This name can be up to 32 characters long. Click the Apply button to accept the changes made. 363