D-Link DGS-1520 User Manual - Page 495

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide use of the SSL function. Currently, the Switch comes with a certificate pre-loaded though the user may need to download more, depending on user circumstances. SSL Global Settings This window is used to display and configure the global SSL settings. To view the following window, click Security > SSL > SSL Global Settings, as shown below: Figure 9-100 SSL Global Settings Window The fields that can be configured in SSL Global Settings are described below: Parameter SSL Status Service Policy Description Select to enable or disable the global SSL status here. Enter the service policy name here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. The fields that can be configured in Import File are described below: Parameter File Select Destination File Name Description Select the file type that will be loaded here. Options to choose from are Certificate and Private Key. After selecting the file type, browse to the appropriate file, located on the local computer, by pressing the Browse button. Enter the destination file name used here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Generate button in the SSL-Self-signed Certificate section to generate a new self-signed certificate, regardless if there is a built-in self-signed certificate or not. The certificate generated does not affect the userdownloaded certificates. NOTE: The SSL self-signed certificate only supports self-signature RSA certificates with a key length of 2048 bits. 485