D-Link DGS-1520 User Manual - Page 506
Monitoring, VLAN Counter
View all D-Link DGS-1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 506 highlights
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide 11. Monitoring VLAN Counter Utilization Statistics Mirror Settings sFlow Device Environment VLAN Counter This window is used to display and configure the VLAN counter settings. This is used to create a control entry for traffic statistics on specified Layer 2 VLAN interface(s). To view the following window, click Monitoring > VLAN Counter, as shown below: Figure 11-1 VLAN Counter Window The fields that can be configured for VLAN Counter Settings are described below: Parameter Interface VLAN Unit From Port - To Port Frame Type Traffic Direction Description Enter the VLAN ID that will be used here. The range is from 1 to 4094. Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the All option to use all the ports in this configuration. Select the frame type here. Options to choose from are: • Broadcast - Specifies to count only broadcast frames. • Multicast - Specifies to count only multicast frames. • Unicast - Specifies to count only unicast frames. • Any - Specifies to count all frames regardless of the frame type. • All - Specifies to count the four frame types mentioned above. Select the traffic direction here. Options to choose from are: • RX - Specifies to count ingress traffic. • TX - Specifies to count egress traffic. • Both - Specifies to count ingress and egress traffic. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry (or entries) based on the information entered/selected. 496