D-Link DGS-1520 User Manual - Page 322
PIM for IPv6 RP Embedded Settings, PIM for IPv6 RP Table
View all D-Link DGS-1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide PIM for IPv6 RP Embedded Settings This window view and configure the IPv6 PIM embedded settings. Embedded RP defines an address allocation policy in which the address of the RP is encoded in an IPv6 multicast group address. This allows an easy deployment of scalable inter-domain multicast and simplifies the intra-domain multicast configuration as well. IPv6 Multicast group addresses embedded with RP information start with ff70::/12 where the flag value of 7 means embedded RP. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for IPv6 RP Embedded Settings, as shown below: Figure 6-111 PIM for IPv6 RP Embedded Settings Window The fields that can be configured are described below: Parameter RP Embedded Description Select to enable or disable the RP embedded feature here. Click the Apply button to accept the changes made. PIM for IPv6 RP Table This window is used to find and display IPv6 PIM RP information. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for IPv6 RP Table, as shown below: Figure 6-112 PIM for IPv6 RP Table Window The fields that can be configured are described below: Parameter Group Address/Prefix Length Source Description Enter the multicast group IPv6 address and prefix length here. Select the source to display here. Options to choose from are: • Bootstrap - Specifies to display ranges learned through the BSR. • Embedded RP - Specifies to display group ranges learned through the embedded rendezvous point (RP). • Static - Specifies to display ranges enabled by static configuration. Click the Find button to locate a specific entry based on the information entered. 312