D-Link DGS-1520 User Manual - Page 18

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide System Information Settings This window is used to display and configure the system information settings and management interface configuration settings. The Management Interface section is only available on the DGS-1520-28 and DGS-1520-52. To view the following window, click System > System Information Settings, as shown below: Figure 3-2 System Information Settings Window The fields that can be configured in System Information Settings are described below: Parameter System Name System Location System Contact Description Enter a system name for the Switch, if so desired. This name will identify it in the Switch network. Enter the location of the Switch, if so desired. Enter a contact name for the Switch, if so desired. Click the Apply button to accept the changes made. The fields that can be configured in Management Interface are described below: Parameter State IPv4 Address Subnet Mask Gateway Description Description Select to enable or disable the state of the management interface here. Enter the IPv4 address for this interface here. Enter the subnet mask for this interface here. Enter the gateway IPv4 address for this interface here. Enter the description for the management interface here. This can be up to 64 characters long. Click the Apply button to accept the changes made. 8