D-Link DGS-1520 User Manual - Page 337

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide IP Multicast Route Settings This window is used to display and configure the IP multicast route settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast Route Settings, as shown below: Figure 6-131 IP Multicast Route Settings Window The fields that can be configured in Static Multicast Route Settings are described below: Parameter Source Address Mask RPF Address Description Enter the network address of the multicast source here. Specifies the network mask for the multicast source here. Enter the RPF neighbor IP address to reach the network here. Selecting the NULL option specifies that the RPF check will always fail for multicast traffic sent from this source network. Click the Apply button to accept the changes made. The fields that can be configured in IP Multicast Route Table are described below: Parameter Summary Static Multicast Protocol Group Address Source Address Description Selecting this option specifies to display a one-line, abbreviated summary of each entry in the IP multicast routing table. Selecting this option specifies to display the multicast static routes. Select this option and then select the multicast protocol that will be used in this display here. Options to choose from are: • PIM-DM - Specifies to display only the PIM-DM routes. • PIM-SM - Specifies to display only the PIM-SM routes. • DVMRP - Specifies to display only the DVMRP routes. Select and enter the multicast group IP address here. Enter the source IP address here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. 327