D-Link DGS-1520 User Manual - Page 282

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Parameter Protocol Metric Type Metric Description Select the source protocol from which routes will be redistributed here. Options to choose from are Connected, Static, and RIPng. Select the external link type associated with the default route advertised into the IPv6 OSPF routing domain here. Options to choose from are External Type-1 and External Type-2. If a metric type is not specified, the Switch adopts a Type-2 external route. This is only for IPv6 OSPF. Enter the metric value here. This value is used when redistributing other processes to an IPv6 OSPF process. The range is from 0 to 16777214. By default, this value is 20. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to delete the specified entry. OSPFv3 Virtual Link Settings This window is used to display and configure the OSPFv3 virtual link settings. To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Virtual Link Settings, as shown below: Figure 6-63 OSPFv3 Virtual Link Settings Window The fields that can be configured in OSPFv3 Virtual Link are described below: Parameter Process ID Instance ID Area ID Router ID Description Enter the ID for an IPv6 OSPF routing process here. It is locally assigned and should be unique for each IPv6 OSPF routing process on the router. The range is from 1 to 65535. Select and enter the instance ID here. The range is from 0 to 255. Enter the OSPF area ID here. It can be specified as an IPv4 address. Enter the router ID here associated with the virtual link neighbor. 272