D-Link DGS-1520 User Manual - Page 543

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Parameter Ping Times Timeout Source IPv6 Address Description Enter the number of times desired to attempt to Ping the IPv6 address configured in this window. Users may enter a number of times between 1 and 255. Tick the Infinite check box to keep sending ICMPv6 Echo packets to the specified IPv6 address until the program is stopped. Select a timeout period between 1 and 99 seconds for this Ping message to reach its destination. If the packet fails to find the IPv6 address in this specified time, the Ping packet will be dropped. Enter the source IPv6 address. If the current Switch has more than one IPv6 address, you can enter one of them to this field. When entered, this IPv6 address will be used as the packets' source IPv6 address sent to the remote host, or as primary IPv6 address. Click the Start button to initiate the Ping Test for each individual section. After clicking the Start button in IPv4 Ping section, the following IPv4 Ping Result section will appear: Figure 13-27 Ping (Start) Window Click the Stop button to halt the Ping Test. Click the Back button to return to the IPv4 Ping section. Trace Route The trace route page allows the user to trace a route between the Switch and a given host on the network. To view the following window, click Tools > Trace Route, as shown below: Figure 13-28 Trace Route Window 533