D-Link DGS-1520 User Manual - Page 193

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide IGMP Snooping Groups Settings This window is used to display and configure the IGMP snooping static group, and view IGMP snooping group. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings, as shown below: Figure 5-76 IGMP Snooping Groups Settings Window The fields that can be configured in IGMP Snooping Static Groups Settings/Table are described below: Parameter VID Group Address Unit From Port - To Port VID Group Address Description Enter a VLAN ID of the multicast group. The range is from 1 to 4094. Enter an IP multicast group address. Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the radio button and enter a VLAN ID of the multicast group. The range is from 1 to 4094. Click the radio button and enter an IP multicast group address. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to view all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. The fields that can be configured in IGMP Snooping Groups Table are described below: Parameter VID Group Address Description Click the radio button and enter a VLAN ID of the multicast group. The range is from 1 to 4094. Click the radio button and enter an IP multicast group address. 183