D-Link DGS-1520 User Manual - Page 310
PIM Register Settings
View all D-Link DGS-1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter RP Hash Description Enter the IPv4 multicast group address here. Click the Find button to display a list of access lists based on the selection made. Click the Show All button to display all configured access lists. PIM Register Settings This window is used to display and configure the PIM register settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM Register Settings, as shown below: Figure 6-96 PIM Register Settings Window The fields that can be configured in Register Checksum Wholepkt are described below: Parameter RP Address Access List Name Description Enter the standard access list that will be used here. Alternatively, click the Show List button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Click the Add button to add a new entry based on the information entered. Click the Delete button to delete an entry based on the information entered. The fields that can be configured in Register Probe Time are described below: Parameter Register Probe Description Enter the register probe time value here. The range is from 1 to 127 seconds. The register probe time is the time before the Register Stop Timer (RST) expires when a DR may send a Null-Register to the RP to cause it to resend a Register-Stop message. By default, this value is 5 seconds. Select the Default option to use the default value. Click the Apply button to accept the changes made. 300