D-Link DGS-1520 User Manual - Page 452

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide IP Source Guard Binding This window is used to display and configure the IPSG binding settings. To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Binding, as shown below: Figure 9-52 IP Source Guard Binding Window The fields that can be configured in IP Source Binding Settings are described below: Parameter MAC Address VID IP Address Unit From Port - To Port Description Enter the MAC address of the binding entry here. Enter the VLAN ID of the binding entry here. Enter the IP address of the binding entry here. Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. The fields that can be configured in IP Source Binding Entry are described below: Parameter Unit From Port - To Port IP Address MAC Address VID Type Description Select the Switch unit that will be used for this query here. Select the appropriate port range used for the query here. Enter the IP address of the binding entry here. Enter the MAC address of the binding entry here. Enter the VLAN ID of the binding entry here. Select the type of binding entry to find here. Options to choose from are: • All - Specifies that all the DHCP binding entries will be displayed. • DHCP Snooping - Specifies to display the IP-source guard binding entry learned by DHCP binding snooping. 442