D-Link DGS-1520 User Manual - Page 77

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Pool Name IPv6 Address / Prefix Length Assigned Length Description Enter the DHCPv6 server pool name here. This name can be up to 12 characters long. Enter the IPv6 prefix address and prefix length of the local pool here. Enter the prefix length to be delegated to the user from the pool here. The value of the assigned length cannot be less than the value of the prefix length. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the User Detail button to view the user information displayed in the lower table. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. DHCPv6 Server Exclude Address This window is used to specify IPv6 addresses that a DHCPv6 server should not assign to DHCPv6 clients. The DHCPv6 server assumes that all addresses (excluding the Switch's IPv6 address) can be assigned to clients. Use this window to exclude a single IPv6 address or a range of IPv6 addresses. The excluded addresses are only applied to the pool(s) for address assignment. To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Exclude Address, as shown below: Figure 4-44 DHCPv6 Server Exclude Address Window The fields that can be configured are described below: Parameter Low IPv6 Address High IPv6 Address Description Enter the excluded IPv6 address or first IPv6 address in the excluded address range here. Enter the last IPv6 address in the excluded address range here (optional). Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 67