D-Link DGS-1520 User Manual - Page 414

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured in Port Security Trap Rate Settings are described below: Parameter Trap Rate Description Enter the number of traps per second. The range is from 0 to 1000. By default, this value is 31. This indicates that an SNMP trap is generated for every security violation. Click the Apply button to accept the changes made. The fields that can be configured in Port Security System Settings are described below: Parameter System Maximum Address Description Enter the maximum number of secure MAC addresses allowed. The range is from 1 to 3328. By default, there is no limit. Tick the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. Port Security Port Settings This window is used to display and configure the port security port settings. To view the following window, click Security > Port Security > Port Security Port Settings, as shown below: Figure 9-2 Port Security Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port State Maximum Violation Action Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select to enable or disable the port security feature on the port(s) specified. Enter the maximum number of secure MAC addresses that will be allowed on the port(s) specified. This value must be between 0 and 3328. By default, this value is 32. Select the violation action that will be taken here. Options to choose from are: 404