D-Link DGS-1520 User Manual - Page 163

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The match order depends on the sequence number of the rule in the profile and stops when matched first. If the sequence number is not specified, it will be allocated automatically. The sequence number begins from 10 and increments 10. Multiple different types of profiles can be configured on one interface. To view the following window, click L2 Features > VLAN Tunnel > VLAN Mapping, as shown below: Figure 5-48 VLAN Mapping Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Port Original VID List Original Inner VID Action VID Inner VID Priority Description Select the Switch unit ID that will be used here. Select the port range that will be used here. Select the port that will be used for the search here. Enter the original VLAN ID list here. The range is from 1 to 4094. Enter the original inner VLAN ID here. The range is from 1 to 4094. Select the action that will be taken here. Options to choose from are: • Translate - Specifies that the outer-VID will replace the outer-VID of the matched packets. • Dot1q-tunnel - Specifies that the outer-VID will be added for matched packets. Enter the VLAN ID here. The range is from 1 to 4094. Enter the inner VLAN ID here. The range is from 1 to 4094. Select the 802.1p priority value here. The range is from 0 to 7. A higher value has a higher priority. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 153