D-Link DGS-1520 User Manual - Page 537

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit SFTP Server IP User Name Password Source File Destination File Description Select the Switch unit that will be used for this configuration here. Select and enter the IP address of the SFTP server here. • IPv4 - Select and enter the IPv4 address of the SFTP server here. • IPv6 - Select and enter the IPv6 address of the SFTP server here. Enter the user name used for the SFTP connection here. This name can be up to 32 characters long. Enter the password used for the SFTP connection here. This password can be up to 15 characters long. Enter the source filename and path of the certificate and key file located on the SFTP server here. This field can be up to 64 characters long. Enter the destination path and location where the new certificate and key should be stored on the Switch. This field can be up to 64 characters long. Click the Restore button to initiate the certificate and key restore. Certificate & Key Backup to HTTP This window is used to initiate a certificate and key backup to a local PC using HTTP. To view the following window, click Tools > Certificate & Key Upgrade & Backup > Certificate & Key Backup to HTTP, as shown below: Figure 13-17 Certificate & Key Backup to HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. Enter the source filename and path of the certificate and key file located on the Switch here. This field can be up to 64 characters long. Click the Backup button to initiate the certificate and key backup. 527