D-Link DGS-1520 User Manual - Page 35

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide Parameter Description For loopback interfaces, this ID can be from 1 to 8. For the management (Mgmt) interface this value is always 0. For VLAN interfaces, this value is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured for Buffer Log Settings are described below: Parameter Buffer Log State Severity Discriminator Name Write Delay Description Select to globally enable or disable the buffer log state here. Options to choose from are Enable, Disabled, and Default. When selecting the Default option, the global buffer log state will follow the default behavior. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. This specifies the name of the discriminator profile that will be used to filter buffer log messages based on the filtering criteria specified within that profile. Enter the log write delay value here. This value must be between 0 and 65535 seconds. By default, this value is 300 seconds. Tick the Infinite option, to disable the write delay feature. Click the Apply button to accept the changes made. The fields that can be configured for Console Log Settings are described below: Parameter Console Log State Severity Discriminator Name Description Select to globally enable or disable the console log state here. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. This specifies the name of the discriminator profile that will be used to filter console log messages based on the filtering criteria specified within that profile. Click the Apply button to accept the changes made. The fields that can be configured for SMTP Log Settings are described below: Parameter SMTP Log State Severity Discriminator Name Description Select to globally enable or disable the SMTP log state here. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. This specifies the name of the discriminator profile that will be used to filter SMTP log messages based on the filtering criteria specified within that profile. Click the Apply button to accept the changes made. The fields that can be configured for Monitor Log Settings are described below: Parameter Monitor Log State Description Select to globally enable or disable the monitor log state here. 25