D-Link DSR-250v2 Product Manual - Page 99
Client Mode
View all D-Link DSR-250v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Authentication protocol Encryption Idle timeout (seconds) Netbios WINS server Apply Cancel Select one or multiple authentication types from the drop-down list (All/PAP/CHAP/MSCHAP/MSCHAPv2). This field is available only when MS-CHAP or MS-CHAPv2 is selected as the Authentication protocol. All: Select the checkbox to select all the encryption options. Mppe 40 Bit: Select the checkbox to enable Mppe 40 bit encryption. Mppe 128 Bit: Select the checkbox to enable Mppe 128 bit encryption. Stateful Mppe: Select the checkbox to enable Stateful Mppe encryption. This mode of Mppe encryption is less secure and can be used for compatibility. Enter the amount of time in seconds, after which the connection will disconnect when idle. Enable it to allow NetBIOS broadcasts to travel over the VPN tunnel. Enter the WINS server address for Netbios. This field is available when you enable Netbios. Click Save to save your settings. Click Cancel to revert to the previous settings. Client Mode The DSR-250v2 can configure the PPTP/L2TP VPN Client. Using this client, we can access a remote network that is local to the PPTP/L2TP server. Once a client is enabled, it will try to auto-connect or manual connect to the server. The fields available on the PPTPclient page are as follows: Field Description