D-Link DWR-960 Product Manual - Page 11
Installation, Initial Setup, RESET, SIM, WPS
View all D-Link DWR-960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Section 2 - Installation Installation This section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in an attic or garage. Initial Setup Ensure that your DWR-960 is disconnected and powered off before performing the steps below. 1. Verify that your SIM/UICC card is installed and has been activated by your carrier. To install your SIM/UICC card, follow the orientation diagram next to the slot. Push gently until it locks into place. Caution: Always unplug/power off the router before installing or removing the SIM/UICC card. Never insert or remove the SIM/UICC card while the router is powered on. 1. SIM RESET WPS SIM card 2. Attach the included antennas to the back of the router, screwing them in clockwise. Arrange 2. them so that they point upwards. 3. Connect the power adapter to the socket on the back panel of your DWR-960. Plug the other end of the power adapter into the wall outlet or power strip. 4. Press the power button and wait for three seconds for the device to be powered on. a. The Power LED will light up green to indicate that power is being supplied to the router and the router is turned on. 3. b. After a few moments, the LED indicators will show the status of the router's various functions. For more information, please refer to LED Indicators on page 6. D-Link DWR-960 User Manual 7