Dell Dimension XPS P60 MT Service Manual - Page 13

Replacing the PCI-Fan Assembly

Get Dell Dimension XPS P60 MT PDF manuals and user guides View all Dell Dimension XPS P60 MT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

4. Remove the drive-bay shroud (see Removing the Drive-Bay Shroud). 5. Remove full-length PCI-Express card(s), if any (see Removing the PCI-Express Card(s)). 6. Disconnect the PCI-fan assembly cable from the connector on the master I/O board. 7. Press the tabs and lift the PCI-fan assembly out of the metal brackets on the chassis. 1 tabs (2) 2 PCI-fan assembly 3 PCI-fan assembly cable Replacing the PCI-Fan Assembly 1. Follow the instructions in Before You Begin. 2. Align the PCI-fan assembly with the metal brackets on the chassis. 3. Slide the PCI-fan assembly into the chassis. 4. Connect the PCI-fan assembly cable to the connector on the master I/O board. 5. Replace full-length PCI-Express card(s), if any (see Replacing the PCI-Express Card(s)). 6. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud). 7. Close the PCI shroud (see Closing the PCI Shroud). 8. Replace the left side-panel (see Replacing the Left Side-Panel). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 9. Connect your computer and all attached devices to electrical outlets, and turn them on. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
4.
Remove the drive-bay shroud (see
Removing the Drive
-
Bay Shroud
).
5.
Remove full-length PCI-Express card(s), if any (see
Removing the PCI
-
Express Card(s)
).
6.
Disconnect the PCI-fan assembly cable from the connector on the master I/O board.
7.
Press the tabs and lift the PCI-fan assembly out of the metal brackets on the chassis.
Replacing the PCI-Fan Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Align the PCI-fan assembly with the metal brackets on the chassis.
3.
Slide the PCI-fan assembly into the chassis.
4.
Connect the PCI-
fan assembly cable to the connector on the master I/O board.
5.
Replace full-length PCI-Express card(s), if any (see
Replacing the PCI
-
Express Card(s)
).
6.
Replace the drive-bay shroud (see
Replacing the Drive
-
Bay Shroud
).
7.
Close the PCI shroud (see
Closing the PCI Shroud
).
8.
Replace the left side-panel (see
Replacing the Left Side
-
Panel
).
9.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
1
tabs (2)
2
PCI-fan assembly
3
PCI-fan assembly cable
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.