Dell Dimension XPS P60 MT Service Manual - Page 31

Before You Begin, Closing the PCI Shroud, Replacing the Left Side, Panel, Back to Contents

Get Dell Dimension XPS P60 MT PDF manuals and user guides View all Dell Dimension XPS P60 MT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

1. Follow the instructions in Before You Begin. 2. Align the screw holes on the processor liquid-cooling assembly with the screw holes on the chassis rear wall. 3. Replace the four screws that secure the processor liquid-cooling assembly to the chassis rear wall. 4. Tighten the four captive screws that secure the processor liquid-cooling assembly to the system board. 5. Connect the processor liquid-cooling assembly cables to the SYS FAN and CPU PUMP connectors on the top lighting-board. 6. Close the PCI shroud (see Closing the PCI Shroud). 7. Replace the left side-panel (see Replacing the Left Side-Panel). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 8. Connect your computer and all attached devices to electrical outlets, and turn them on. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
1.
Follow the instructions in
Before You Begin
.
2.
Align the screw holes on the processor liquid-cooling assembly with the screw holes on the chassis rear wall.
3.
Replace the four screws that secure the processor liquid-cooling assembly to the chassis rear wall.
4.
Tighten the four captive screws that secure the processor liquid-cooling assembly to the system board.
5.
Connect the processor liquid-cooling assembly cables to the SYS FAN and CPU PUMP connectors on the top lighting-board.
6.
Close the PCI shroud (see
Closing the PCI Shroud
).
7.
Replace the left side-panel (see
Replacing the Left Side
-
Panel
).
8.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.