Dell PowerConnect Brocade M6505 Hardware Reference Manual - Page 59

Supported HBAs A TABLE 12 Feature Architectural specifications (Continued) Description Port types Fabric services (Native Fabric mode only) Fabric OS Native mode • E_Port (expansion port) • F_Port (fabric-enabled port) • U_Port (self-discovery based on switch type) AG mode • F_Port (fabric-enabled port) • N_Port (NPIV-enabled port) Simple Name Server, Registered State Change Notification (RSCN) Supported HBAs For information regarding supported Fibre Channel mezzanine adapters, refer to Dell-specific product information. For additional information, refer to your Dell PowerEdge documentation. Fibre Channel standards compliance The SAN I/O Module meets or exceeds the Fibre Channel standards for compliance, performance, and feature capabilities as defined in the Brocade standards compliance list. This information is available at: http://www.brocade.com/products/interop/standards_compliance.jsp Regulatory compliance This section describes the regulatory compliance requirements for the Product Name. FCC warning (US only) This equipment has been tested and complies with the limits for a Class A computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense. Brocade M6505 16 Gbps Fibre Channel SAN I/O Module Hardware Reference Manual 47 53-1002576-02