Dell PowerEdge M640 EMC for VRTX enclosure Installation and Service Manual - Page 53
Air shroud, Removing the air shroud
![]() |
View all Dell PowerEdge M640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Air shroud Removing the air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in Safety instructions on page 45. 2. Follow the procedure listed in Before working inside your system on page 45. Steps Hold the air shroud at both ends, and lift it away from the system. Figure 14. Removing the air shroud Next steps Install the airshroud Installing the air shroud Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 45. Steps 1. Align the tabs on the air shroud with the slots on the system. 2. Lower the air shroud into the system until the air shroud is firmly seated. Installing and removing system components 53
![](/manual_guide/products/dell-poweredge-m640-emc-vrtx-enclosure-installation-service-manual-1222e51/53.png)